The FIR1 personal sauna surrounds the bather with 6 FIR heaters for maximum exposure. No other FIR sauna room provides anything close to this degree of body coverage. There are 3 heaters just for the legs, with direct exposure in front of and behind both lower legs. A 4th heater is at the back, plus one for each side of the upper body.
The FIR1 is very comfortable with an extra-deep seat, over 24” of leg room, and a footrest (not shown). There are 2 windows – 1 at your side and another in the end wall that you face. It plugs into a standard, grounded, 15-amp, 110V outlet.
Many companies promote their saunas as if they are built like ours – “non-toxic”, “medical grade”, “hypoallergenic”. They typically aren’t built like ours at all but their clever marketing can fool folks into thinking they are! By using non-aromatic wood, it may seem as if their saunas are also made in a safest manner. The wood selection is only a first step in creating safer saunas, but it can be used as a marketing tool to create the illusion of greater safety.
Most FIR sauna construction is adhesive-based as it’s faster to secure wood to a glue-coated frame with nail guns than by inserting screws, and it allows for the use of thin paneling. Very thin, cheaper wood is typically glued-on like a veneer. They are designed for mass production, economy, and appearance – not for the “purity” required of a real medical-quality sauna.
FIR sellers often downplay the use of glue by claiming to use small amounts of “safe glue”. In every FIR sauna we’ve seen, thick gobs of adhesives secured all of the visible boards – walls, bench, floor, and ceiling to the frames.
Some USA-made carpenter’s glues are labeled “non-toxic” but they are not chemical-free. Most are water-emulsified plastic with a long list of allowed chemical additives (biocides, thinners, preservatives, coloring agents, etc.). Most FIR saunas sold in America today are Chinese or Vietnamese. What is in these glues? While detoxifying, the last thing you want to do is sweat out one toxin and inhale the fumes of another!
Heavenly Heat saunas are built in Arizona and shipped crated. Components are sized smaller than is typical (wall widths are limited to 32” max) to assure the ability to carry each part through any door or stairway. Assembly is simple – mostly by closing stainless steel latches, and they may be disassembled and relocated.
Each sauna is built with counter-sunk non-corrosive steel screws rather than glue, and with much thicker paneling to assure that each sauna is a clean-air environment that is essential for detox. This also yields strong, highly durable saunas with a lifetime warranty on construction, the electrical, and the heaters.